ASTM F384 Dispositivos Ortopédicos Metálicos en Ángulo de Fijación de Fracturas
Los dispositivos ortopédicos de fijación o tornillos de compresión se usan para tratar fracturas en las áreas de metáfisis de los huesos largos. Al aplicar una carga de compresión se crea una flexión en la parte del ángulo que debe ser evaluada por los investigadores para determinar la resistencia y rigidez de los materiales y diseños y también es útil para el cirujano para predecir el rendimiento. También es necesario determinar la resistencia a la fatiga durante un tiempo específico o a una carga concreta. Por estas razones, la fijación debe simular las cargas de compresión sobre la parte angular de la placa debidas al peso corporal.
El ensayo se basa en la norma ASTM F384 (Especificaciones y métodos de prueba para dispositivos ortopédicos metálicos en ángulo para fijación de fracturas). Para el ensayo estático, se aplica un rampa de carga de compresión hasta que se produce una deformación plástica en el dispositivo de fijación. El objetivo es determinar la rigidez de la placa ante la flexión. Para evaluar de manera precisa el comportamiento del dispositivo será necesario utilizar un accesorio de flexión de 4 puntos y un equipo de ensayo de fatiga (Electropuls o 8870) La fijación está diseñada para trabajar con o sin baño salino y pude ser adaptada para trabajar con un gran número de muestras de diferentes formas y tamaños.
ElectroPuls
With more than ten years of running tests over billions of cycles, ElectroPuls systems are the established materials testing instruments using patented linear motor technology. Offering slow-speed static and high-frequency fatigue testing, this versatile testing capability means ElectroPuls systems are ideal for any lab or office space. Choose from axial only or combined axial-torsion systems that can deliver up to 10kN and 100Nm.
- Productos
- 6/5/2019
- 1.9 MB
ElectroPuls™ E3000 Linear-Torsion All-Electric Dynamic Test Instrument
The ElectroPulsTM E3000 Linear-Torsion is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, bi-axial DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Productos
- 3/3/2017
- 0.7 MB
ElectroPuls™ E3000 All-Electric Dynamic Test Instrument
The ElectroPulsTM E3000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, DynacellTM load cell, Console software, and the very latest in testing technology–hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Productos
- 3/3/2017
- 0.7 MB
E10000 Combined POD
The ElectroPulsTM E10000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, bi-axial DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Productos
- 7/11/2019
- 0.8 MB
ElectroPuls E10000 All-Electric Dynamic Test Instrument
The ElectroPulsTM E10000 is a state-of-the-art, all-electric test instrument designed for dynamic and static testing on a wide range of materials and components. It includes Instron® advanced digital control electronics, DynacellTM load cell, Console software, and the very latest in testing technology – hassle-free tuning based on specimen stiffness, electrically operated crosshead lifts, a T-slot table for flexible test set ups and a host of other user-orientated features. Powered from a single-phase supply it requires no additional utilities for basic machine operation (for example, pneumatic air, hydraulics, or water).
- Productos
- 3/3/2017
- 0.7 MB