Nuestra web utiliza cookies para asegurar la mejor experiencia al usuario. Para continuar navegando en nuestra web, usted está aceptando el uso de cookies. Más información

cerca Close Cookie Notification
Instron
  • Back
  • Home
  • Productos
    SISTEMAS DE ENSAYO
    Sistemas de ensayo universales
    Durabilidad estructural
    Sistemas de ensayo automatizados
    Sistemas de ensayo dinámicos y de fatiga
    Simulación de impacto
    Sistemas de ensayo de torsión
    Péndulos y torres de impacto
    Reómetros y medidores de fluidez
    HDT y Vicat
    Sistemas fuera de producción
    ACCESORIOS
    Software
    Mordazas de tracción
    Pelado, fricción y punzonado
    Cámaras ambientales y hornos
    Células de carga
    Fijaciones de flexión
    Platos de compresión
    Fijaciones para el sector biomédico y farmacéutico
    Extensómetros
    Células de carga
    Fijaciones para la microelectrónica
    Medición y preparación de probetas
    Todos los accesorios
    Catálogo de accesorios
  • Soluciones Industriales
    Mordazas de tracción POR NORMATIVA POR TIPO DE ENSAYO
    POR SECTOR
    Sector aeroespacial
    Sector automotriz
    Sector biomédico
    Sector electrónico
    MATERIALES
    Composicion
    Rieles
    Plástica
  • Servicio y soporte
    Instron Remote Technical Support CICLO DE VIDA DEL PRODUCTO
    SERVICIOS
    Calibración y verificación
    Ayuda en la implementación de Instron
    Mantenimiento preventivo
    Instalación y reubicación
    Reparación y renovación
    Actualizaciones
    FORMACIÓN
    Formación in situ en sus instalaciones
    Secretos para Ensayos Fiables
    SOPORTE TÉCNICO
    Preguntas frecuentes
    Servicios de actualización de software
    RECURSOS
    Localizador de número de serie
    Manuales
  • Nuestra empresa
    EMPLEO SALA DE PRENSA SUSCRÍBASE A NUESTRO BOLETÍN DE NOTICIAS
    ACERCA DE NOSOTROS
    Nuestra historia
    Localización
    Certificados y acreditaciones
    RECURSOS
    Glosario
    Tipos de ensayo
    Estudios de caso
    Biblioteca de documentación
    Noticias
    Eventos
    Seminarios web
    Boletines informativos
    Términos y privacidad
    Accesibilidad
    Aviso de cookies
    Aviso de privacidad de datos GDPR
    Control de exportación
    Aviso de Privacidad
    Términos y condiciones
    Condiciones de uso
  • Contacto
  • España
Productos » Sistemas de ensayo » Structural Durability » Structural Durability Products » Power Packs and Accessories

Power Packs and accessories

Menu
  • Structural Durability Products
    • Controller Labtronic® 8800ml
    • Hydropuls® actuators
    • Power Packs and Accessories
    • Sensors
    • Servo valves
    • Test frames and fixtures
Contact Us
Hydraulic
Hydraulic 2
Hydraulic 3
Hydraulic 4
  • Hydraulic
  • Hydraulic 2
  • Hydraulic 3
  • Hydraulic 4
  • DESCRIPCIÓN
  • Related Products
  • Software

Challenge

High-quality hydraulic power supply units are required to supply hydraulic oil to servohydraulic linear and rotary actuators, testing machines and test systems. Due to the use of servovalves, care must be taken to ensure the highest purity of the pressure oil in order to ensure a long service life of the valves. At the high pressures and oil velocities that occur in a servohydraulic system, even the smallest dirt particles at the control edges of the servo valve are highly erosive. 

Since the units often operate continuously around the clock, maintenance requirements and the ease of service are key considerations. In addition, modern hydraulic units have to meet high standards with regard to laboratory safety, energy consumption and environmental compatibility.

Solution

Instron hydraulic power supply units (HPUs) are the result of many years of experience in the field of high-pressure hydraulics.
Instron offers 6 standardized hydraulic units with nominal flow rates between 26 l / min. Up to 365 l / min at operating pressure 280 bar (other operating pressures, e.g.: 210 bar are also possible).
The power packs can be coupled to one another in order to enable larger flow rates, resulting in a large shared reservoir. The respective motors and pumps can be individually switched in order to ensure economical operation.

Class A efficiency motors combined with variable flow pumps provide the best possible energy efficiency whilst the standard 280 Bar operating pressure provides further efficiency benefits in comparison to 210 bar systems.

All the key components have been designed to minimize service requirements and are easily accessable for inspection and preventative maintenance. The optional pump management system ensures service hours of multiple pumps are balanced to further optimize maintenance times and costs.   

For centralized hydraulic facilities, Instron offers tailor-made solutions to suit the specific needs of the laboratory. In this case, central tanks can be used and the size and number of motor-pump units can be optimized for efficiency.

The essential features of the Instron hydraulic power packs are as follows:

  • Low energy consumption thanks to infinitely variable flow control.
  • Constant operating pressure (adjustable up to 290 bar).
  • Pressure line filtration of the oil
  • Robust and self-priming pump in 9-piston axial piston design
    • Extremely low volumetric pulsation
    • free from cavitation effects
  • Very smooth running due to multiple vibration insulation
  • Connection-ready with complete control electronics
  • Oil cooling with water (optionally with air)
  • Operation direct and/or via remote control
  • Designed for minimal maintenance and ease of service

In addition to test systems operating with a defined and fixed number of actuators, a high degree of flexibility is required for the testing of components with regard to expansion, interchangeability or modification of the test set-up. In order to meet these requirements, Instron has developed the concept of modularly configurable function blocks. The function blocks consist of different functional units which are combined as required to perform the following tasks:

  • Switch the hydraulic power on and off
    • Pre-filling with low flow and low pressure in setup mode
    • Pressure increase to nominal pressure
    • Save energy and targeted delivery as needed
  • Reduced and limited working pressure and flow
  • Pressure relief

Axle Test System

Axle test rigs are used to reproduce different loads applied to the axle elements when a vehicle is traveling over a variety of road surfaces. Instron can provide models for testing of car, van, truck and bus axles with 6 degree-of-freedom.

Component Test Systems

Instrons component testing systems are characterized by the highest quality and reliability, ensuring the highest productivity in daily use.

Multi-Axis Shaking Table (MAST)

Multi-axis simulation (MAST) tables are designed for testing of a variety of different specimens in six degrees of freedom. These include components and subassemblies exposed to vibratory loads during vehicle operation; from seats, dashboards and interior equipment components to engine mounts, and cooling modules.

Road Simulator

HYDROPULS® road simulators are a versatile and cost efficient solution for testing load inputs through the tires. They are used to perform durability tests, as well as acoustic and vibration analyses in testing and development (BSR, NVH) on complete vehicles, subsystems and power train assemblies.

Full Vehicle Test System

Instron offers comprehensive solutions with and without vehicle restraint, with long- or short-stroke introduction of lateral forces as well as the optional environmental simulation with regard to temperature humidity and sun loading.

Biaxial Wheel Test System (ZWARP)

The Biaxial Wheel Test (ZWARP) developed by Instron includes an additional hydraulic actuator which allows a controlled and highly accurate adjustment of the angle of attack to produce high lateral forces.

Dynamic Torsion Test System

The dynamic torsion test stand is designed for the operational fatigue testing of torsional vibration dampers under rotational speed.

Shock Absorber Test Systems

Instron's MSP test system is the ideal tool for reliable, fast and realistic tuning of vehicle chassis designs and development of shock absorber systems.

Elastomer Test System VHF and MHF

The MHF and VHF excel outstanding flexibility and the capability to adapt to constantly changing requirements of the viscoelastic properties of elastomeric suspension and chassis components. They are designed specifically for optimum testing of these components to establish their dynamic characteristics.

RSLabSite modulogic

All you need for your durability tests is the measurement data obtained from the proving ground – RS LabSite® modulogic will do the rest!

Selección Zona

Dismiss Region Selector

Americas

  • North America
  • Brasil
  • South America

All Other Countries

  • Global Site

Europe

  • France
  • Deutschland
  • Italia
  • Polska
  • España
  • Türkçe
  • United Kingdom

Asia Pacific

  • 中国
  • India
  • 日本
  • 대한민국
  • 台灣
  • ประเทศไทย
Instron Logo White
INFORMACIÓN DE CONTACTO

C/ Argenters 2,
Parque Tecnológico del Vallés,
08290 Cerdanyola,
Barcelona, Spain

General: +34 935 947 560

ENLACES ÚTILES
  • Sistemas de ensayo
  • Software
  • Accesorios
  • Catálogo
  • Biblioteca
  • Soluciones de ensayos
  • Seminarios web
  • Estudios de caso
  • Eventos
  • Empleo
  • Glosario
  • Noticias
Policies / Legal
  • Privacidad y política de cookies
  • Condiciones de uso
  • Control de exportación
  • Aviso de datos (RGPD)
CONECTE CON NOSOTROS
SUSCRÍBASE A NUESTRO BOLETÍN DE NOTICIAS
DIRECCIÓN DE CORREO ELECTRÓNICO
© Illinois Tool Works Inc. Todos los derechos reservados.
[email protected]
  • Privacidad y política de cookies
  • Condiciones de uso
  • Control de exportación
  • Aviso de datos (RGPD)