25kN / 100Nm Fatigue Rated Hydraulic Wedge Action Grips for 8874 Machine
8260C | Fatigue Rated Hydraulic Wedge Grips
±25kN / ±100Nm Fatigue Rated Hydraulic Wedge Grips for 8874 System
- Feature side-entry design with full access for easy specimen insertion from the side
- Adjustable specimen stops on flat faces provide accurate specimen centering
- Suitable for tension and compression (including full reverse-stress dynamic testing) combined with torsional capability
- Temperature Range: +4C to +65C
- Mounts directly to 8874 actuator and load cell without additional fatigue rated adapters
- Mechanical interface: 6 x M8 on 75 PCD
- Dimensions: 260mm high x 130mm diameter
- Grip mass: 16.8 kg (37lbs) approximately per grip
8874 machine requires 8000-049 attachment kit if load cell is fitted to actuator
Requires: Jaw faces (select from 2703-801 to 804 as required) and 207 Bar (3000psi) grip controller
Quantity: 2 grips
| Capacity | 25 kN (5500 lbf) |
|---|---|
| Lower Fitting | Direct to actuator/load cell |
| Notes | Suitable for Model 8874. Requires : 207 bar (3000psi) hydraulic power supply |
| Temperature Rating | +10 to +40°C (+50 to +100°F) |
| Torque Capacity | 100 Nm (885 in-lb) |
| Upper Fitting | Direct to actuator/load cell |
±25 kN/100 Nm (5.6 kip/0.6 kip-in) Axial/Torsional Hydraulic Grips (8260C)
±25 kN/100 Nm (5.6 kip/0.6 kip-in) Axial/Torsional Hydraulic Grips catalog number 8260C
- Productos
- 11/7/2005
- 103.6 KB