Pneumatic Side Action Grips 1kN
2712-041 | Pneumatic Side Action Grips
Capacity: 1 kN (100 kg, 225lb)
Temperature range: -20 °C to +100 °C (-4 °F to +212°F)
Maximum specimen thickness: 13mm (0.5 in)*
*Depends on jaw faces selected
Upper and lower fittings: 6 mm clevis pin, male
Requires jaw faces and an Air Distribution Kit
Optional Air Control Kit with footswitch is available
| Accessory Weight | 2.5 kg (5.5 lb ) |
|---|---|
| Accessory Width | 126 mm (5.0 in ) |
| Capacity | 1 kN (225 lbf ) |
| Lower Effective Length | 176 mm (6.9 in ) |
| Lower Fitting | 6 mm Clevis Pin (Type Om) |
| Specimen Thickness | 0 to 13 mm (0 to 0.5 in ) |
| Temperature Rating | -20 to +100 °C (-4 to +212 °F ) |
| Upper Effective Length | 176 mm (6.9 in ) |
| Upper Fitting | 6 mm Clevis Pin (Type Om) |
- Universal Air Distribution Kit (No Pretension or Footswitch)
- Universal Pneumatic Footswitch (No Pretension)
- Automatic Air Control Kit
- Specimen Holders with Integral Specimen Alignment Device
- Jaw Faces for Flats (Rubber Coated, 25 X 25 mm)
- Jaw Faces for Flats (Rubber Coated, 25 X 38 mm)
- Jaw Faces for Flats (Rubber Coated, 25 X 50 mm)
- Jaw Faces for Flats (Rubber Coated, 38 X 12.5 mm)
- Jaw Faces for Flats (Rubber Coated, 38 X 25 mm)
- Jaw Faces for Flats (Rubber Coated, 38 X 50 mm)
- Jaw Faces for Flats (Rubber Coated, 50 X 25 mm)
- Jaw Faces for Flats (Rubber Coated, 50 X 38 mm)
- Jaw Faces for Flats (Rubber Coated, 50 X 50 mm)
- Jaw Faces for Flats (Rubber Coated, 75 X 25 mm)
- Jaw Faces for Flats (Rubber Coated, 75 X 50 mm)
- Jaw Faces for Flats (Rubber Coated, 150 X 50 mm)
- Jaw Faces for Flats (Serrated, 25 X 25 mm)
- Jaw Faces for Flats (Serrated, 25 X 38 mm)
- Jaw Faces for Flats (Serrated, 38 X 12 mm)
- Jaw Faces for Flats (Serrated, 38 X 25 mm)
- Jaw Faces for Flats (Serrated, 38 X 50 mm)
- Jaw Faces for Flats (Serrated, 50 X 25 mm)
- Jaw Faces for Flats (Serrated, 50 X 38 mm)
- Jaw Faces for Flats (Serrated, 50 X 51 mm)
- Jaw Faces for Flats (Serrated, 75 X 25 mm)
- Jaw Faces for Flats (Serrated, 75 X 50 mm)
- Jaw Faces for Flats (Serrated, 150 X 50 mm)
- Jaw Faces for Flats (Smooth, 25 X 25 mm)
- Jaw Faces for Flats (Smooth, 25 X 38 mm)
- Jaw Faces for Flats (Smooth, 25 X 50 mm)
- Jaw Faces for Flats (Smooth, 38 X 12 mm)
- Jaw Faces for Flats (Smooth, 38 X 25 mm)
- Jaw Faces for Flats (Smooth, 38 X 50 mm)
- Jaw Faces for Flats (Smooth, 50 X 25 mm)
- Jaw Faces for Flats (Smooth, 50 X 38 mm)
- Jaw Faces for Flats (Smooth, 50 X 50 mm)
- Jaw Faces for Flats (Smooth, 75 X 25 mm)
- Jaw Faces for Flats (Smooth, 75 X 50 mm)
- Jaw Faces for Flats (Smooth, 150 X 50 mm)
- Jaw Faces for Flats (Brake Lining, 25 X 38 mm)
- Jaw Faces for Flats (Brake Lining, 38 X 25 mm)
- Jaw Faces for Flats (Brake Lining, 50 X 38 mm)
- Jaw Faces for Flats (Line Contact, 25 mm)
- Jaw Faces for Flats (Line Contact, 75 mm)
- Jaw Faces for Rounds (Vee-Serrated, 3 to 6.5mm dia. X 25 mm)
- Jaw Faces for Rounds (Vee-Serrated, 6 to 18.5mm dia. X 25 mm)
2712 Series Pneumatic Side Action Grips (2712-041, 2712-042, 2712-045, 2712-046)
Instron® 2712-04x Series Pneumatic grips, packed with features to enhance gripping performance, usability, and operator safety.
- Productos
- 7/8/2009
- 1.1 MB